Advantages of WZF milling cutters

Carbide rough milling cutters

• High cutting performance despite low power consumption
  
• Optimal chip removal for short chips
  
• Higher quality of workpiece surface due to new type of roughing profile
  
• Different helix angles 30/32° ensure reduced vibration operation
  
• Collision protection through offset neck
  
• Cutting edge geometry for plunge milling
  

Carbide finish milling cutters

< 1600 N/MM²

• Especially for fine finishing
• Stable cores combined with flutes with non-uniform pitch or different spiral angles for high feed rates and long service life
• Collision protection through offset neck
  
• Cutting edge geometry suitable for plunging down to milling depth

Carbide 3D milling cutter

• Especially for high requirements in die and mould making
  
• Ball nose with constant cutting angle and continuous spiral for high wear protection
• Collision protection through offset neck
  

Carbide rough and finish milling cutters for aluminium

• For grooves, roughing and finish milling of aluminium and aluminium alloys
• Also suitable for long-chip producing materials, plastics and non-ferrous metals (copper)
• Rough/finish milling cutters in four different lengths to 5xd
  

Carbide milling cutters for graphite

• Wide range of carbide milling cutters from diameter 0.2 mm for machining graphite electrodes
• Long life through diamond coating
  
• Perfect concentricity through extremely tight tolerances in the µ range on the diameter, the shank and the corner radius