Kontakt

Za Vas smo dostupni od ponedeljka do petka od 8:00 do 17:00 časova. Preko ovog linka možete pronaći kontakt osobe za Vaš region.

Sedište u Wolfurtu
+43 5574 6706-0

Vaše kontakt osobe

SHOP

Korpa {{ (warenkorbCtrl.warenkorb.bestellNummer ? (' [' + warenkorbCtrl.warenkorb.bestellNummer + '] ') : '' )}} | {{warenkorbCtrl.warenkorb.items.length}} Artikal Izmena pregleda korpe

Primedba

Slika

Artikal

kom.

Cena za jedan komad

Ukupna cena

Ukupna cena uklj. popust

{{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben:[{attrPrefix: 'L_', searchPattern: '/...', replacePrefix: '/', replaceSuffix: ''}] }} {{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben}}

{{attributwertEingabe.attributBezeichnung}}

{{hannexItem.Bezeichnung}}

: Prijavite se da biste videli svoje cene i nastavili da naručujete.

Speed Lap Set

V 76860

Opis proizvoda

Uključuje sve oblike materijala za lepovanje
Hard pads and bars for applying diamond compound in order to carry out lapping work
Isporučuje se u adekvatnoj plastičnoj kutiji

E Information about the Meusburger Speed Lap system on page

Izbor proizvoda

Informacije o proizvodima

Preporuke za proizvod

Izbor proizvoda

		Set	Br.	Cena / komad	Količina
		V 76862/4x 4/140 - 1 pc V 76862/6x10/140 - 1 pc V 76862/8x 8/140 - 1 pc V 76863/3/ 50 - 2 pcs V 76863/5/140 - 1 pc V 76863/8/140 - 1 pc V 76866/V1/4 - 5 pcs V 76866/V1/5 - 5 pcs V 76866/V1/6 - 5 pcs V 76866/V1/8 - 5 pcs V 76866/R1/4 - 5 pcs V 76866/R1/5 - 5 pcs V 76866/R1/6 - 5 pcs V 76866/R1/8 - 5 pcs V 76866/D1/6 - 5 pcs V 76866/D1/8 - 5 pcs V 76868/2,5 - 1 pc V 76868/3,3 - 1 pc	V 76860/Set	193,00 €

Informacije o proizvodima

Tehnički saveti

E The Meusburger Speed Lap System

The speed lap system comprises of pads and bars for applying diamond compounds in order to obtain high surface quality while saving time.

New composite material
Prevents the washing out of soft constituents and the formation of built-up edges
Higher material removal rate (compared to other lapping techniques)
Less sensitive to pressure
Enables consistent, scratch-free lapping
Sturdy lapping bars

Technical information

Preparing the lapping pads:
Before using the lapping pads for the ﬁrst time, use a ﬁne abrasive paper or diamond foil to hone them.
Preparing the lapping bars:
Adjust the lapping bars to the shape of the surface on which you are going to use them; this can be done with sanding discs, abrasive paper or ﬁles. You can use a collet to hold circular lapping bars.
Grit:
The optimum grit size is 6 μm but you can also use a coarser grain structure. If required, you can lap to 3 μm.
Lubrication:
You can use VLM 5 Cutting ﬂuid or VLM 20 Polishing oil for thinning the diamond compound.
Pressure:
For 60–70% of this work step, apply light pressure; for the rest of the time, that is: for ﬁnishing, do not apply any pressure.
Hand-filing machine:
Speed: 4.000-7.000 min^-1
Stroke length: 0.5-1.0 mm